Validating certificate wireless

I configured the IAS policy to grant access to Domain Computers, Authentication is set to PEAP and uses a private cert issued by our CA, the other profile settings are all default.The client settings on the laptop match the IAS settings and the certificate is definately installed.

validating certificate wireless-59

If the Enable IEEE 802.1x authentication for this network box is checked, it will trigger the “unable to find a certificate to log you on to the network” message because Windows is looking for a certificate but your wireless router is not set up for certificate security.

Step 6 Select the Connection tab and check the Connect when this network is in range box.

I suspect a firmware upgrade probably fixes that behaviour.

I'd start by reviewing the event logs on your IAS server for reasoning as to why it's not authenticating your client.

This error is typically related to wireless network authentication and often appears because your Windows device is mistakenly searching for an 802.1x connection. Step 3 Right-click wireless network connection, then select Properties.

Step 4 Select the Wireless Networks tab, and then select the network from the bottom list.

WPA2 is supported as i can connect to WPA2 personal APs. During the connection it flashes that it "connected" for a second then goes to "Validating Identity" which it eventually timesout on.

I am using the Windows Wireless Connection Manager. On a couple of occasions I've seen that particular AP (don't know what firmware) suddenly stop attempting to authnenticate clients (it never sends any RADIUS requests) and power-cycling the AP "fixes" the issue.

Upon validating, the device may then transmit a uniform resource locator, extracted from the certificate issuance notification message, to a network entity configured for processing certificate issuance.

Tags: , ,